Underbust corsets

Shown in red, half red/black, black with a silver metal zipper, half pink/white, striped red/white, and black with a black plastic zipper

Thanks to your requests we have redesigned our underbust corset with a sturdy front zipper! This shape is perfect when paired with PVC jumpsuits or lingerie. We sew this with four flat steel bones on the front for stomach flattening, flexible steel boning sides and flat steel boning at the back and is just long enough to cover the top of the hips.

Available in all combinations of our store PVC colours! If you want a solid colour pick that from the options below, or pick a split colour option using the other drop down menu. We can make this in any colour combination as well as striped! Just add a short note to the comments of your order. Be sure to check out the detail shots to see how we use a custom half pink/white or half red/black zipper!

You will want to go a size up if you have never worn a steel corset before or just want a more comfortable fit. The sizing for our steel boned corsets is your waist size minus 2-5 inches so that the corset can be worn with a 1-3 inch gap and a 2-3 inch reduction in the waist. When fully closed the waist size is 20" for extra small, 22" for small, 24" for the medium, 26" for large, 28" for extra large, 30" for a XXL, but most people leave the corset open a few inches in the back and still get the same hourglass look. This corset is approximately 9-9.5" long in the front, 8-8.5" long at the side, and 9-9.5" long at the back.

Shown in black PVC with a Bunny Face Harness, a PVC Harness Buckle bra, a PVC zipper buckle thong, and a PVC Buckle Choker.

Our new steel boned underbust corset with garter clips! This corset cups the top of your hips, frames your butt in the back, and has 2 metal garter clips on each side attached to adjustable buckles. If you are looking for a version with 3 clips on each side that covers the sides of your hips you can find it here. Available in all our store colors including silver holographic (VERY bright classic silver holographic colour) as shown, and black holographic (subtle oil slick holographic) with your choice of silver or gold eyelets and buckles.

Constructed with four 1/4" flat steel bones at the front, 1/2" flat steel boning at the back, and the sides are boned with 1/4" spiral steel boning for flexibility and comfort. We've designed with extra boning on the front to flatten your stomach while giving you a hourglass shape. We sew this from PVC with a thicker PVC lining so its thick enough to be durable and cinch you without stretching but thin enough to be comfortable and bend with your body. This corset is approximately 8" in the front, 9" on the shortest part of the side, and 8" in the back.

The sizing for our corsets is smaller than most "off the rack" corsets since with the steel boning you can expect a 1-3" reduction to your waist with a 1-4" gap in the gap depending on your comfort level and waist training experience. You'll want to pick a corset with that is 3-5" smaller than your natural waist. The approximate corset sizes at their waist are 19" for the XXS, 21" for extra small, 23" for small, 25" for the medium, 27" for large, 29" for extra large, and 31" for an XXL. If you don't want to lace this tightly, have a larger stomach, or have never worn a steel boned or stiffer non stretchy corset, you may want to go a size up (especially if you have never worn a steel corset before).

We can sew gold or silver front eyelets for an extra $20, or a separating black plastic, white plastic, grey with silver teeth as shown (best match for the silver holographic), or a black or white zipper with gold or silver teeth for an extra $15. Be sure to e-mail us after checkout if you have any questions!

Shown in silver holographic PVC with a Holographic PVC Harness Buckle Bra and a Holographic PVC Buckle Choker and our Holographic PVC Zipper Buckle Thong. Shown in leatherette with a Krampus Fur Shrug and  a PVC harness bra with silver buckles and eyelets. Shown in bright blue with a PVC bow belt, Cuban heel PVC stockings, a pink PVC Metal accented Bustier ($110), and a Short sleeve Gothic Lolita Shrug in Lilac with a matching neck bow in pink. Shown in black holographic with a PVC Cage bra worn over a Holographic Bra. Also shown in regular silver PVC with a PVC Zipper Buckle Thong.

Our new steel boned underbust corset with garter clips! This corset cups the top of your hips, frames your butt in the back, and has 3 metal garter clips on each side attached to adjustable buckles. If you are looking for a version with 2 clips on each side that covers less of your hips you can find it here. Available in all our store colors including silver holographic (VERY bright classic silver holographic colour) as shown, and black holographic (subtle oil slick holographic) with your choice of silver or gold eyelets and buckles. 

This corset is approximately 9" in the front, 11" on the shortest part of the side, and 8" in the back. Constructed with four 1/4" flat steel bones at the front, 1/2" flat steel boning at the back, and the sides are boned with 1/4" spiral steel boning for flexibility and comfort. We've designed with extra boning on the front to flatten your stomach while giving you a hourglass shape. We sew this from PVC with a thicker PVC lining so its thick enough to be durable and cinch you without stretching but thin enough to be comfortable and bend with your body.

The sizing for our corsets is smaller than most "off the rack" corsets since with the steel boning you can expect a 1-3" reduction to your waist with a 1-4" gap in the gap depending on your comfort level and waist training experience. You'll want to pick a corset with that is 3-5" smaller than your natural waist. The approximate corset sizes at their waist are 19" for the XXS, 21" for extra small, 23" for small, 25" for the medium, 27" for large, 29" for extra large, and 31" for an XXL. If you don't want to lace this tightly, have a larger stomach, or have never worn a steel boned or stiffer non stretchy corset, you may want to go a size up (especially if you have never worn a steel corset before).

We can sew gold or silver front eyelets for an extra $20, or a separating black plastic, white plastic, grey with silver teeth as shown (best match for the silver holographic), or a black or white zipper with gold or silver teeth for an extra $15. Be sure to e-mail us after checkout if you have any questions!

Our classic underbust corset with more boning on the front to flatten your stomach and give you a hourglass shape. We've angled the top and bottom for a more flattering shape when worn with dresses and flared skirts. This corset has four flat steel bones on the front for stomach flattening, flexible steel boning sides and flat steel boning at the back and is just long enough to cover the tops of the hips so it looks just as good with flared out dresses as it does with tight clothing.  If you'd like a shorter version check out our regular Angled Corset Belt. This style is approximately 9-10" tall at the centre where it is longest.

Available in all store PVC colours (different colour trim, or alternating colour panels available free of charge as shown, add a note to comments of order). We also can sew gold or silver front eyelets for an extra $20, or a separating black plastic, white plastic, gold or silver zipper for an extra $15. Be sure to e-mail us after checkout if you have any questions! 

Sizing for our steel boned corsets is your waist size minus 3-5 so that the corset can be worn with a 1-3 inch gap and a 2-3 inch reduction in the waist comfortably. If you were to wear this corset fully closed the waist size would be 20 for extra small, 22 for small, 24" for the medium, 26" for large, and 28" for extra large, 30" for a XXL, but you can leave the corset open an inch or two more and still get the same hourglass look. You will want to go a size up if you have never worn a steel corset before or just want a more comfortable fit. 

Shown in red, pink, black, crimson, red, matte (not shiny) white, and black snakeskin PVC

Our basic underbust corset has extra boning on the front to flatten your stomach and give you a hourglass shape. Around 10" long at the centre front, if you'd like a slightly shorter angled version (around 9.5") you can find it here. This is just long enough to cover the tops of the hips of an average height female. We use four 1/4" flat steel bones at the front to flatten your stomach, 1/2" flat steel boning at the back, and the sides are boned with 1/4" spiral steel boning for flexibility and comfort. Available in all store PVC colours! We can use different colour trim, or alternating colour panels free of charge. Just add a note to the comments of your order. We can sew gold or silver front eyelets for an extra $20, or a separating black plastic, white plastic, gold or silver zipper for an extra $15. Be sure to e-mail us after checkout if you have any questions!

Sizing for our steel boned corsets is the waist size minus 3-5 so that the corset can be worn with a 1-2 inch gap and a 2-3 inch reduction in the waist comfortably. If you were to wear this corset fully closed the waist size would be 20 for extra small, 22 for small, 24" for the medium, 26" for large, and 28" for extra large, 30" for a XXL, but you can leave the corset open an inch or two more and still get the same hourglass look. You will want to go a size up if you have never worn a steel corset before or just want a more comfortable fit.

You can wear this awesome mini corset/belt with practically anything! PVC dresses for a curvy look, satin slips, baby doll dresses, leggings, or catsuits. Perfect for bringing a little bit of shine to your day wear. And unlike most of the belts out there you'll actually make your waist look smaller instead of boxy since the pieces are curved. Steel boned with flexible 1/4" spiral steel boning on the sides and 1/4" flat steel on the front and 1/2" flat steel on the back. Between 5.5 to 6" tall in the front depending on the size.

Available in all store colours (including silver and black holographic) and made with spiral steel boned with thick backing and metal eyelets and grommets for durable construction in XXS to XL. Available with a black, red, pale pink, sand (beige), or white lace overlay for an additional $20, or $30 for more expensive black or white. You can see all the different shades here.

The sizing for this corset is smaller than most "off the rack" corsets since with steel boning you can expect a 1-3" reduction to your waist with a 1-3" gap in the back. You'll want to pick a corset with that is 3-5" smaller than your natural waist. The approximate corset sizes at their waist are 19" for XX-small, 21" for extra small, 23" for small, 25" for medium, 27" for large, and 29" for extra large. However if you are comfortable wearing corsets you will want to go a size down for extra cinching power. Most people have no problem wearing this corset with 1-2" gap (trust us you'll be surprised at how small you can cinch your waist with this corset because of its slimmer width) and it gives great hourglass definition to squarer body shapes. This style is best for cinching in the center of your waist (does not cover the ribs or lower stomach) so if you have a larger stomach you may want to purchase a longer corset or wear this mostly over clothing.

Shown in leatherette with silver buckles and worn over an Artifice Victorian Fur Coat, with a PVC harness bra , PVC spiked choker, and a PVC Garter Corse.

Our new Angled Cincher belt with front buckle accents! We've designed this uniquely shaped item to be worn over clothing to shape the sides of your waist. This steel boned mini cincher is approximately 3" high in the front and closes with two metal buckle straps in the front. When worn you can use the eyelets and lacing in the back to corset your waist smaller. This unique corset belt has longer structured 6" sides tapering down to 4" in the back to give you an exaggerated curve on the sides of your waist. This is a great accessory if you want a waist defining but comfortable belt to wear over your hourglass jackets or our structured fur coats as shown.

We sew this with four flat steel bones on the front, flexible steel boning sides, and flat steel boning at the back. Available with black, white, gold, or silver eyelets in the back and black, red, or white lacing. Available in all our store colours (including silver and black holographic) with your choice of silver or gold buckles.

Be sure to e-mail us after checkout if you have any questions! Pick the size of the corset using the options below depending on what you want to wear it over. If you intend to wear this over a jacket, bulky dress, or fur coat (or just don't want to lace it tightly) you may want to purchase a size or two large than your normally would if you don't want a larger gap in the back. 

The sizing for our steel boned corsets is your waist size minus 2-4 inches so that the corset can be worn with a 1-3 inch gap and a 2-3 inch reduction in the waist. When fully closed the waist size for this style is 20" for extra small, 22" for small, 24" for the medium, 26" for large, 28" for extra large, 30" for a XXL, but most people leave the corset open a few inches in the back and still get the same hourglass look. This style is best for cinching in the center of your waist (does not cover your stomach) so if you need waist control versus an angled side shaping belt you may want to consider one of our other underbust corsets.

Shown with silver front eyelets, a PVC Cage bra, a PVC face harness, basic PVC underwear, and PVC Gloves. Shown in bright blue with a short sleeve gothic lolita shrug, a PVC bra, and basic underwear. Shown in red with a a PVC Waspie underbust corset with front eyelets, a PVC Face Harness, a PVC Buckle Choker, and a PVC metal accented bustier with silver buckles and eyelets. Shown with a PVC Cage bra, a PVC face harness, a PVC Waspie underbust corset with a front zipper, a PVC Zipper Buckle thong, and a Monarch shrug.

We've shaped our PVC Waspie to give you an exaggerated curve on the sides of your waist while being short enough for comfort. This shape is perfect when paired with jumpsuits, high waisted underwear or shorts, cage bras and bustiers. We sew this with four flat steel bones on the front for stomach flattening, flexible steel boning sides and flat steel boning at the back. Available with black, white, gold, or silver eyelets in the back and black, red, or white lacing. Available in all our store colours (including silver, black, and clear holographic).

The base price is for a plain PVC corset with back lacing and does not include the extra front eyelets or a zipper. Please use the options below to pick what style you'd like for the front!  We can sew gold or silver front eyelets for an extra $20, or a separating black plastic, white plastic, red plastic, gold or silver zipper for an extra $15. Be sure to e-mail us after checkout if you have any questions!

You will want to go a size up if you have never worn a steel corset before or just want a more comfortable fit. The sizing for our steel boned corsets is your waist size minus 2-5 inches so that the corset can be worn with a 1-3 inch gap and a 2-3 inch reduction in the waist. When fully closed the waist size is 20" for extra small, 22" for small, 24" for the medium, 26" for large, 28" for extra large, 30" for a XXL, but most people leave the corset open a few inches in the back and still get the same hourglass look. This corset is approximately 6.5-7" long in the front, 6" long at the sides and 7" on the back. This style is best for cinching in the center of your waist (does not cover the lower stomach) so if you have a larger stomach you may want to purchase a longer corset or wear this mostly over clothing.