This outfit is our Classic Harley Quinn Hood, Harley Quinn Stockings, Harley Quinn Gloves with White Cuffs, and a Harley Quinn Sleeveless Jumpsuit with a matching Angled Corset Belt. Our Harley Quinn sleeveless Jumpsuit made from 4-way stretch PVC with a front or back zipper! We can accommodate other colour combinations (matte (not shiny) black/matte (not shiny) red, black/pink, red/dark blue) and use since this item is made to order. Just please put a note in the comments of the order with the left and right side colours :)! Be sure to check your sizes using our guide here and if you are in between sizes go for the smaller size since the fabric is stretchy.
For this jumper the regular zipper position is on the front so you can unzip to show cleavage but we can sew it to the back or the front using the options below. We can also add a 2-way zipper from either the back of the neck around to a few inches above your crotch or from the base of the neck around to the top of the butt for an extra $13. You'll be able to unzip from either direction. The sturdy 2-way nylon zipper may not be as comfortable since there will be no stretch on the crotch but it will be much easier to make bathroom trips (especially if you wear this with a corset).
We offer free height and size adjustments and if you have a larger/smaller bust or hips, please add a note to the comments of your order or e-mail us right after checkout and we can easily mix/match sizes where the colours change and lengthen as needed. This product is just for the jumpsuit, the stockings, hood, and gloves must be purchased separately. If you'd like to add the Classic Harley Quinn hood shown you can purchase it here or use the options below (+$70). You can add an angled corset belt as shown for $55 extra or a longer angled steel boned underbust corset for an extra $95. Sizing for the corset belt is the waist size minus four inches so that the corset can be worn almost completely closed as shown give you a three and a half inch reduction in the waist comfortably. The actual corset belt sizes at their waist (smallest part of the corset) are 19" for XXsmall, 21" for extra small, 23" for small, 25" for medium, 27" for large, and 29" for extra large. Howeverif you are comfortable wearing corsets you will want to go a size down for extra cinching power.
Because this outfit is made out of red and black fabric you won't be able to store it by folding it the same way as you would a single colour outfit. Lighter colours of PVC like latex can be stained by darker PVC colours (especially if they touch for too long). To avoid the colours staining each other please either hang your Harley outfit up, or if you want to fold it keep the tissue we ship the costume in and put a layer of tissue in between each fold so that colours don't touch.
White PVC Harley Quinn collar with a back zipper! This is a cuter option instead of wearing the full hood and looks great with a blonde or white wig and can be used turn any of your red/black outfits into a Harley Quinn look. If you'd like us to sew 6 1.5" white pompoms to the tips of this collar like our "Classic Harley Hood" please use the options below! The cost will go up by $17.
If you'd like a specific width please let us know in the comments of your order! Otherwise please pick one of the standard sizes in our drop down menu. XS/XXS is a 11.5-13" neck, S/M is a 13-14" neck, L/XL is a 14-15" neck.
Available in all of our colours of PVC with your choice of accent colour and shown in white with red accents.
A cute vintage touch to any nurse look! Please choose your accent colour for the trim and buttons using the options below (you can pick any accent colour you want by putting a note in the comments). This stays on with an elastic chin strap which you can also wear behind your head or pinned on depending on your hairstyle.
Our clear PVC vintage style nurse hat looks great with our clear PVC clothing! Please choose your accent colour for the trim and buttons using the options below (you can pick any accent colour you want by putting a note in the comments). This stays on with an elastic chin strap which you can also wear behind your head or pinned down depending on your hairstyle. Available in clear PVC with white and red accents or clear PVC with black with red accents. If you would like this in a different colour combination please e-mail us after checkout or add a note to the comments of the order.
Our PVC clown horns with bow tips! The two thinner striped horns/hats are attached to a slim PVC headband. The horns are made with a thick foam liner for structure. You can wear this with multicolored clothing for a Clown costume or Harley Cosplay! If you want a single PVC clown/birthday hat look please look here!
Available in all of our colours of PVC with your choice of accent colour and bow tip. We will make the horns in your choice of two colours (use the colour option to pick) and the bow and the stripe accent (use the accent trim colour option). If you want this to only be made in two colours and symmetrical on both sides do not choose an accent colour. This is an intricately made item so we prefer to speak to you through e-mail after your order and before we start sewing so we can confirm what colour you want for the stripes on the right side, stripes on the left side, and the colour for the stripe on both side and bow tips. The headband is available in either black or white.
We've designed this new pointed seven layer peplum belt to sit perfectly over your corseted waist with targeted volume on the upper sides of the hips and a thick base with light boning to prevent it from shifting around on your body. You can wear this over any corset (ones with a slightly pointed front work best if you want to hide the front strap) to give it a Victorian clown touch! The sides curve upwards to hug your hips without adding volume to your tummy and we use a little bit of plastic boning on the sides to keep it in place. The size is adjustable from the front with a PVC strap that you can tuck underneath the bottom edge of your corset for a seamless look! Available in all our store colours with either black or white plastic buckles in the centre.
We can make this in any two colours with your choice of accent colour (the colour in between each of the two layers, for example if you choose black/red (harley colours) and white as the accent colour this will be sewn in black/white/black on one side and red/white/red on one side). If you want this to only be made in two colours and symmetrical on both sides do not choose an accent colour. We can make the layers three different colours for the same price. This style shown is yellow/white/green on one side and coral pink/white/yellow on the other. Feel free to leave a short clear note in the comments of your order or we prefer to speak to you through e-mail after you order and before we start to sew so we can sew this to match your costume perfectly. Available based on your hip size in XXS for customers with very narrow hips, XS/S as shown, M/L, and XL/XXL. If you aren't sure what size you are e-mail us after checkout!
Available in anycolour combination! To choose your colours e-mail us after checkout. Let us know what colours you'd like us to use for the gloves and and what two (or single) colours you'd like for the cuffs! These come with your choice of regular or fingerless gloves and wrist cuffs with an adjustable elastic base and a hidden velcro closure. Your can pair these with our striped PVC or Harley Quinn clothing, lingerie, or corsets to complete your fetish/fashion/scary/whatever clown outfit.
If you aren't sure what size you are choose the "not sure" options and e-mail us after checkout with the measurement around your hand (not including thumb), and your wrist measurement. This does not come with the matching PVC Bow Neck ruff but you can add it to your order by purchasing it separately here or using the option below (+$110).
Our 2 part Harley Quinn wrist length gloves made from 4-way stretch PVC and white PVC wrist cuffs look great worn with lingerie, corsets or Harley Quinn PVC jumpsuits! The white PVC cuffs have an adjustable elastic base and a hidden velcro closure. For this style we make the right hand red and the left hand black. We can accommodate other colour combinations (matte (not shiny) black/matte (not shiny) red, black/pink, red/dark blue) and use since this item is made to order. Just please put a note in the comments of the order with the left and right side colours :)!
If you aren't sure what size you are choose the "not sure" options and e-mail us after checkout with the measurement around your hand (not including thumb, measure just below where your finger start and your wrist measurement.
The rainbow version of our Angled Long Underbust corset! Designed with more boning on the front to flatten your stomach and give you a hourglass shape. We've angled the top and bottom for a more flattering shape when worn with dresses and flared skirts. This corset has four flat steel bones on the front for stomach flattening, flexible steel boning sides and flat steel boning at the back and is just long enough to cover the tops of the hips so it looks just as good with flared out dresses as it does with tight clothing.
We also can sew gold or silver front eyelets for an extra $20, or a separating plastic (as shown), black with gold or silver teeth or white with gold or silver teeth zipper for an extra $15. Be sure to e-mail us after checkout if you have any questions!
Sizing for our steel boned corsets is your waist size minus 3-5 so that the corset can be worn with a 1-3 inch gap and a 2-3 inch reduction in the waist comfortably. If you were to wear this corset fully closed the waist size would be 20 for extra small, 22 for small, 24" for the medium, 26" for large, and 28" for extra large, 30" for a XXL, but you can leave the corset open an inch or two more and still get the same hourglass look. You will want to go a size up if you have never worn a steel corset before or just want a more comfortable fit.